AutoCAD Lesson 106 – Creating Simple Plan

After we watched and learn from previous lesson 105.

Let’s take a look these next Topic. Watch and follow step by step to create your first drawing.

Follow step by step

1. Command: REC (RECTANG)
   Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: F
   Specify fillet radius for rectangles <0>: 20
   Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 0,0
   Specify other corner point or [Area/Dimensions/Rotation]: @300,300

1. Command: Z (ZOOM)
   Specify corner of window, enter a scale factor
   (nX or nXP), or [All/Center/Dynamic/Extents/
   Previous/ Scale/Window/Object] : E

1. Command: O (OFFSET)
   Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
   Specify offset distance or [Through/Erase/Layer] <50>: 50

1. Select object to offset or [Exit/Undo] :
   Specify point on side to offset or [Exit/Multiple/Undo] :
   Select object to offset or [Exit/Undo] :

1. Command: C (CIRCLE)
   Specify center point for circle or
   [3P/2P/Ttr (tan tan radius)]:
   Specify radius of circle or [Diameter] <25>: 25

1. Command: MOCORO 1 found
   Base point: [Move/Copy/Rotate/Scale/Base/Undo]: C
   Second point of displacement/Undo/:
   Second point of displacement/Undo/:
   Second point of displacement/Undo/:
   Second point of displacement/Undo/:
   [Move/Copy/Rotate/Scale/Base/Undo]:

1. Command: Select object to erase.
   Command: E
   ERASE 1 found

“Note: Follow the step first, after that you can experiment in you own way to make your work more faster and easy.“